Control Switch Block (Gz92000); Mic Unit - Sony PMW-200 Service Manual
Solid-state memory camcorder
Hide thumbs
Also See for PMW-200:
- Operating instructions manual (141 pages) ,
- Service manual (23 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
2-13-2.
Control Switch Block (GZ92000)
Procedure
1.
Remove the three precision screws (M2 x 5).
2.
Disconnect the flexible board from the connector CN101 on the RM-238 board to detach the handle (upper) case
assembly.
Note
When connecting the flexible board, securely connect it to the connector CN101.
3.
Remove the two tapping screws (2 x 5) and the two precision screws (M2 x 4) to detach the control switch block
(GZ92000).
Hanlde (upper) case assembly
Control switch block
(GZ92000)
Precision screws
(M2 x 4)
Tapping screws
(2 x 5)
4.
Install the removed parts by reversing steps of removal.
2-13-3.
MIC Unit
Preparation
1.
Remove the handle (upper) case assembly.(Refer to
Procedure
1.
Remove the two precision screws (M2 x 5) to detach the hinge (front) cover assembly.
PMW-200/PMW-EX280
Precision screws
(M2 x 5)
Flexible board
RM-238 board
"2-13-2. Control Switch Block
CN101
(GZ92000)".)
2-25
Advertisement
Table of Contents
