Procedure
1.
Remove the two precision screws (M2.6 x 5) to detach the MIC holder assembly and microphone holder rubber
cover.
Precision screws
(M2.6 x 5)
2.
Remove the one precision screw (M2 x 5) to detach the XLR cover.
3.
Remove the two precision screws (M2 x 4) to detach the MIC bracket.
XLR cover
Precision screw
(M2 x 5)
4.
Remove the two push buttons.
5.
Remove the precision screws (M2 x 5) to detach the cable holder.
6.
Remove the four screws (PTT2.6 x 6) to detach the AXM-48 board.
PMW-200/PMW-EX280
MIC holder assembly
Microphone holder rubber civer
Precision screws
(M2 x 4)
MIC bracket
2-34