2. Hardware Configuration
This section will describe the hardware settings of the PISO-DNM100.
This information includes the wire connection and terminal resistance
configuration for the CAN network.
2.1 Board Layout
Note: PISO-DNM100-T layout is similar with PISO-DNM100-D. The only
difference is the position of CAN port connector. The positions of jumper or DIP
switch are the same. Therefore, users can also refer to the PISO-DNM100-D
layout to configure the jumper or DIP switch if they use PISO-DNM100-T.
PISO-DNM100 DeviceNet Master API functions User's Manual (Ver: 1.0)
Figure2.1
PISO-DNM100 Board LAYOUT
2008/02/25
18