PCI-D96SU/D128SU Card
5. Board Testing
This chapter provides detailed information about the "Self-Test" process, which is used to confirm
that the PCI-D96SU/D128SU card is operating correctly. Before beginning the "Self-Test" process,
ensure that both the hardware and driver installation procedures are fully completed. For detailed
information about the hardware and driver installation, refer to
Chapter 3 "Hardware Installation"
and
Chapter 4 "Software Installation".
5.1 Self-Test Wiring
Before beginning the "Self-Test" procedure, ensure that the following items are available:
A CA-SCSI100-15 Cable
(Optional, Website: http://www.icpdas.com/products/Accessories/cable/cable_selection.htm)
A DN-100 Terminal Board
(Optional, Website:
http://www.icpdas.com/root/product/solutions/pc_based_io_board/daughter_boards/dn-100.html)
Step 1: Connect the DN-100 terminal board to the CON1 connector on PCI-D96SU/D128SU card
using the CA-SCSI100-15 cable.
User Manual, Ver. 1.0, Apr. 2019, PMH-031-10 Page 26