Troubleshooting - NuWave Nutri-Pot 10Q Owner's Manual

PROBLEM
Difficulty closing lid.
Difficulty opening lid.
Gas leakage from
cooker lid.
Gas leakage from the
Floater Valve.
Floater Valve does not
raise up.
Pressure not
building up
If the unit needs to be replaced or returned to the manufacturer,
please contact our Customer Service Department at:
1-877-689-2838 • help@nuwavenow.com
30
Owner's Manual

TROUBLESHOOTING

POSSIBLE CAUSE
Silicone Gasket
may not be placed
correctly. Floater Valve
may be blocking the
push rod.
The Floater Valve
may not be falling
down properly.
Pot may be still
under pressure.
Some ingredients
may get stuck to
the Silicone Gasket.
Silicone gasket may
be broken.
Some ingredients may
stick to the Floater
Valve's sealing circle.
The Floater Valve's
sealing circle may
be broken.
There may not be
enough ingredients/
water to generate
enough pressure.
Gas leakage from
lid or Pressure
Release Valve.
The lid is not properly
locked in place.
RESOLUTION
Place the Silicone Gasket
correctly. Push the Floater
Valve to the correct position.
Push the Floater
Valve Correctly.
Clean the Silicone Gasket.
Make sure that the lid is close
see "Care and Maintenance"
Clean the Anti-Clog Filter.
The Floater Valve's sealing
circle may need to be
replaced.
Ingredients or water need to
be at minimum level.
Unit may need to be sent
to the manufacturer.
Take the Lid off and retry.
Hold Lid, lower it, and turn
clockwise to lock. LED panel
will light up and display that
Sure Lock™ Safety Feature is
activated. Pressure will start
building up after that.