Double Spco Relay Card - Honeywell 5701 Operating Instructions Manual

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 2 - SYSTEM DESCRIPTION
5.3 Double SPCO Relay Card (Part Number 05701-A-0327)
5.3.1 General
Provides connections between the sensor and the control card in
the same way as the Field Interface Card. In addition, single pole
relays provide voltage free contact outputs for the A1 alarm level,
A2 alarm level and fault condition.
5.3.2 Rear Access Connections
Fault NC
Fault COM
Not Connected
A1(1) NC
A1(1) COM
A2(1) NC
Ground
Sensor S Connection
Sensor NS Connection 29
Analogue O/P (+)
Remote Inhibit In
+24V (Out/In)
NC = Normally Closed.
Relay contact conditions refer to the no power state of the relay.
1
3
5
7
9
11
25
27
31
33
35
NO = Normally Open. COM =
2 - 14
5701 Control System
Slot
Location
2 Fault NO
4 Not Connected
6 Not Connected
8 A1(1) NO
10 A2(1) COM
12 A2(1) NO
26 Ground
28 Sensor 01 Connection
30 Not Connected
32 Analogue O/P (-)
34 Remote Reset In
36 0V (Out/In)
User
Terminal
Reference
Common.