14
4.
Functions of the programming card set
The programming card set consists of 3 cards.
RESET card
The respective mode of the ACC 50 can be changed with these cards. The installer programs the
programming card set.
RESET card:
Attention! The data memory is completely cleared and the ACC 50 returns to normal
mode! Only use this card for set-up or for deletion of all ID cards
PROGRAM card:
The ACC 50 changes to programming mode. All ID cards which are read in subsequently get an
authorization in dependence on the input "timer".
CLEAR card:
The ACC 50 changes to the disable mode. ID cards which had authorization rights so far can be
disabled in the disable mode. All cards which are read in subsequently are disabled in the ACC 50.
Please consider the appertaining time zone "A" and "B".
PROGRAM card
brown-black open
brown-black closed
CLEAR card
= time zone "A"
= time zone "B"
Operating Instructions ACC50