Connecting Controlnet Cables To Your Repeater; Connecting Power And Relay Circuitry - Honeywell EXPERION PKS Installation Manual
Controlnet
Hide thumbs
Also See for EXPERION PKS:
- User manual (270 pages) ,
- Specifications and technical data (47 pages)
Table of Contents
Advertisement
4.3.4
Connecting ControlNet cables to your repeater
For information concerning connecting ControlNet cables to your repeater(s), refer to
repeaters
4.3.5
Connecting power and relay circuitry
CAUTION
If you are using DC to power the repeater, L1 is positive (+) and L2/N is negative (-).
See Step 2 of the following procedure.
1. Remove the terminal strip cover.
Figure 4.2 Grounding repeaters
in this guide.
Chapter 4 - ControlNet Network Component Installation
- 22 -
Connecting to
Hide quick links:
Advertisement
Table of Contents
