Honeywell 5701 Operating Instructions Manual page 172

MAN0443.P65 Issue 13 Aug 04
05701-M-5001 A02279
CHAPTER 6 - OPERATING INSTRUCTIONS
To output a summary of the whole rack, proceed as follows:
(1) Plug a RS232 printer into the Engineering Card serial port.
(2) Push the up ( ) and down ( ) buttons simultaneously without any
channel card being selected and the following data will be printed:
21/07/97 11:05 ** Rack info. **
Card type
S/W
Eng key override : in-active
Customer name :
DMT
Customer site :
Essen
Serial No
Slot
Card type
S/W
Serial number
Tag
Gas
Range
Active alarms
--
Slot
Type
S/W
Serial No
Tag
Gas
Range
Active alarms
--
Slot
Type
S/W
Serial No
Tag
Gas
Range
Active alarms
Note: The information printed will vary slightly depending on the type of
sensor drive module fitted to the channel card.
: Engineering card
: v02.10
: 22411A17
: 01
: 5701
: v02.40
: 22411C01
: Vent 23C
: Methane
: 0 - 100
: FT
: 02
: 5701
: v00.75
: 22411C02
: 23C-03
: Methane
: 0 - 100
: A1
: 12
: 5701
: v00.75
: 22411C02
: Unknown
: Unknown
: 0 - 100
: None
6 - 11
5701 Control System