Display Element Removal Andreplacement; Display Element Removal And Replacement - IBM 3180 1 User Manual

DISPLAY ELEMENT REMOVAL AND REPLACEMENT
CAUTION
When performing this procedure, do not touch any parts on the inside of
the logic element. They can be easily damaged.
1.
Place the display element in the highest position
and make sure it is tilted forward.
O Push in side knobs.
O Pull up.
2. Set the Power switch to Off.
l \
3. Unplug the power cord from the wall outlet and from
the display station.
4. Remove the cable from the cable attachment module.
Cable-
Cable
Attachment-
iVIodule
Chapter5. Element Removal and Replacement Procedures 99