Configuring The Keyboard; Installing The Customer Display - IBM 4613 SurePOS Installation And Operation Manual

Point-of-sale terminal
Table of Contents

Advertisement

July 27, 2007 - Approval Draft

Configuring the Keyboard

The SurePOS 100 shipment contains a kit with 96 clear keycaps, six clear double
keys, and a keycap puller. A keycap legend sheet is included. The language in
which the sheet is written varies depending upon the country to which the unit was
shipped.

Installing the Customer Display

Follow these instructions to install the optional customer display:
1. Unpack the customer display and parts from the shipping container.
2. Locate the Customer Display Filler Cap A that is installed on the top of the
3. Remove the rear cable access panel. For details, refer to "Installing the
4. Install the display yoke.
Tips:
a. There are two mounting post options: short and tall. Install either the short
post, the tall post, or both of the posts for additional display height.
b. Leave the protective film that covers the lens in place until after installation
is complete.
SurePOS 100. Using your fingers, press upward from under the cap and
remove the filler cap.
SurePOS 100" on page 11.
Installation Instructions
Chapter 2. Installation Instructions
A
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4613 surepos 100

Table of Contents