IBM 3180 1 User Manual page 88

4.27
80
From the following chart, find the error code displayed on
your display and do the recovery procedure listed. If more
than one error code appears, use the one furthest to the left.
Error
Code
Recovery Procedure
NV
You can continue operating by pressing the Reset key.
If you continue, however, your record and play keystroke
sequences will have to be entered again. Also, the
brightness, contrast, alarm and clicker volumes, and
so on, may need to be entered again.
If this error occurs frequently, replace the logic element.
{Go to Chapter 5.)
ID
Reset your display station model ID. (Refer to Chapter 1,
Section 3, Entering the Display Station Model ID and the
Keyboard ID in this manual.)
If your display station model ID is set correctly and you
still have a problem, replace the logic element.
(Go to Chapter 5.)
L, LI. L5.
or LL
Replace the logic element. (Go to Chapter 5.)
L2
The 27 X 132 display format is failing.
L3
The 32 X80 display format is failing.
L4
The 43 X80 display format is failing.
If you use the failing format, replace the logic element.
(Go to Chapter 5.)
If you do not use the failing format, press the Reset
key and continue operating.
Continued
C9468043