IBM 3180 1 User Manual page 118

Open Closed
IS. Plug the power cord into the wall outlet.
19. Use Chapter 1, Section 3 to set the display station
model ID and the keyboard ID and then return here
and proceed with the next step.
20. Set the Power switch to On and verify that the display
station is operating correctly.
If the problem still exists, you may have to replace a
second element. For instructions, return to the last
step of the CPAR that directed you to Chapter 5.
If you have replaced all the elements listed at the end
of the CPAR and still have a problem, contact your
IBM sales representative.