IBM 3180 1 User Manual page 23

Press the SetUp r_j key.
mm
niilH
Bigeiijg|iaili||a|ia|ilSlilf
•Liiiyiiiiiii]
A blinking diamond will appear on the bottom of the display.
Press the Model ID
igini|[w[ni!|[||niiii|[i
Biglgliliaiililiaillililiini I
Inil iii|i iirtiii|i||—
The display station model ID on the bottom of the display
will change.
^ J
Note: If a 9012 error code appears on the bottom of the
display or if nothing happens, begin this section again.
Chapter 1. 3180 Setup Procedure 15