IBM 3180 1 User Manual page 90

4.28
4.29
82
From the foilowing chart, find the error code displayed on
your display and do the recovery procedure listed.
Error
Code
•|
Recovery Procedure
K
Replace the keyboard element. (Go to Chapter 5.)
If the problem still exists, replace the logic element.
KN
Make sure the keyboard cable is securely fastened.
Press the Reset key. If the KN error code appears
again, replace the keyboard element.
(Go to Chapter 5.)
The character displayed at X indicates that a key is stuck.
H HHHHHHHHHHHHHHHHHHHHHHHHKHHHKHHHHHHHH H
H
[HKHUfltBmiHHOtftflMMWUIMItiKtllMgia H
H H
H Effi E E E Q H
H H
H H
n n n n i
H bL
XEEBEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEESEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEX
18/a
Check all the keys on your keyboard, including the spacebar, for
any stuck keys.
Are there any stuck keys on your keyboard?
Yes No
Attempt to fix the key so
that it is no longer stuck.
If you cannot fix the key,
replace the keyboard elennent.
(Go to Chapter 5.)
Replace the keyboard element.
(Go to Chapter 5.)
CS46804S