Faults And Malfunctions; Safety Instructions; Error Messages On The Display Of Operating Panel Memory - Steelcase Migration Bench User Manual

Faults and malfunctions

Faults and malfunctions

Safety instructions

For troubleshooting, the following always applies:
DANGER
Danger from electrical voltage!
Contact with electrical voltage can cause severe injury or death by electric
shock!


-
-
-
NOTICE
Risk of damaging the electrical equipment!


Error messages on the display of operating panel Memory

If malfunctions occur during operation, please check whether the Migration desk has been handled according
to the user manual. In most cases, this will help you find and eliminate the problem.
Some errors that may occur are shown on the display of the operating panel Memory. The "Error" segment
flashes.
The following table should help you find the cause and correct the error.
Migration Manual -en- 2018
Remove or insert connectors only in de-energised state.
Do not open the housings of the following components:
Controller
Columns
Operating panel
Do not use the mains cable to pull the plug out of the power point.
Page 28 of 35