Operation And Settings; Safety Instructions - Steelcase Migration Bench User Manual

Operation and settings

Operation and settings

Safety instructions

The desk Migration may be used and operated only in perfect technical condition and in compliance with the
user manual.
Before you change the desk height, make sure of the following:

The desktop must be horizontal. In case of uneven floors, you can adjust the height using the adjusting
screws on the feet.

No one is allowed to stay in the lifting range. Make sure that no objects (such as open doors or windows)
are in or protrude into the lifting range.

Nobody should be on the desktop.

The maximum permissible carrying capacity of the desk must not be exceeded.
DANGER
Danger from electrical voltage!
Contact with electrical voltage can cause severe injury or death by electric
shock!


-
-
-
DANGER
Danger from electrical voltage!
Metal parts of the desk may be under electrical voltage in case of damage to
live cables and connections.

WARNING
Danger of injury and damage!
When loading the CPU holder with a weight higher than the permissible
weight, the fastening screws may tear.

WARNING
Danger of injury and damage!
When lifting on the desktop or attached components, the fastening screws
may tear.

Migration Manual -en- 2018
Remove or insert connectors only in de-energised state.
Do not open the housings of the following components:
Controller
Columns
Operating panel
Do not earth electrical devices on the desk frame!
Note the permissible weight.
Transport or move the desk only by grabbing the base frame.
Page 19 of 35