Installation And Assembly; Safety Instructions; Checking The Delivery Contents; Disposing Of The Packaging Material - Steelcase Migration Bench User Manual

Installation and assembly

Installation and assembly

Safety instructions

WARNING
Danger of crushing and shearing!
The process of electrical height adjustment may result in crushing or
shearing of body parts or objects.
WARNING
Danger of injury and damage!
When lifting on the desktop or attached components, the fastening screws
may tear.

Checking the delivery contents

After unpacking, the product must be checked immediately for transport damage and for completeness. Any
damage must be reported to the manufacturer as soon as possible.

Disposing of the packaging material

The packaging includes the following:

Outer packaging made of cardboard.

Shrink film made of polyethylene (PE)

Bubble wrap made of polyethylene (PE).

Edge protectors made of cardboard or polyethylene (PE).

Corner protectors made of polyethylene (PE).
These materials are recyclable. When the product is assembled by Steelcase or an authorised installer, the
packaging is disposed of by the manufacturer. If you install yourself, please ensure sorted separation and return
to the recycling cycle.

Electrical connection

Check the electrical equipment of the desk. Rectify defects such as loose connections and damaged cables
immediately.
Remove or insert connectors only in de-energised state.
The plug of the desk must be easily accessible at all times.
For information on the connections for the motor controller, refer to the user manual COMPACT_eco
Firmware Version 1.9 at www.logicdata.at.
Migration Manual -en- 2018
Maintain sufficient lateral clearance (at least 2.5 cm) to all surrounding

objects, walls, etc. throughout the lifting range.
Position the desk in such a way to ensure sufficient space for lifting and

maintenance.
Transport or move the desk only by grabbing the base frame.

Page 16 of 35