Summary of Contents for Steelcase Migration SE Height-Adjustable Desk and Bench
Page 1
USER GUIDE Important safety information included. Save and keep with desk. Migration SE Height-Adjustable Desk and Bench...
Page 2
If any of these conditions exist, remove from service immediately. Repairs are to be made using only factory authorized parts and methods. For information on furniture maintenance, or to report furniture which requires service, call Steelcase toll-free at 1.888.783.3522. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY...
Page 3
To reduce the risk of burns, fire, electric shock, or injury to persons: The desk or table shall be positioned near power socket and the plug shall be easily accessible. When using an electrical furnishing, basic precautions should always be followed, including the following: 1.
Page 4
HEIGHT ADJUSTMENT CONTROLLERS For a visual demonstration, please visit youtube.com/steelcasetv Up/Down Controller OPERATING THE CONTROLLER The controller has two buttons for user control. • Press and hold either the down button to reach the desired desk height. • The desk will continue to move up or down until the user releases the button or the maximum or minimum height is reached.
4 Preset Programmable Controller with Digital Display STORE HEIGHT INTO MEMORY • Adjust the desk to the position you want to save. The display will show the desk height. • To store the height: A. Press the button. The display will read s. save B.
MAINTENANCE AND CLEANING Regularly clean dust and dirt from lifting columns. To ensure all surfaces are thoroughly cleaned, make sure the lifting columns are fully extended to their maximum height. Also, be sure to inspect cables and lifting columns for damage.
Page 7
• The control box is coded to operate only when all lifting columns are properly connected. It is not possible to operate lifting columns individually for troubleshooting purposes. • To properly identify faulty lifting columns, refer to step D of the troubleshooting steps. Note: Contact your Steelcase dealer for troubleshooting assistance.
PRODUCT SPECIFICATION Range of Adjustment Basic Height: 28.3" - 46.9" (719 mm – 1,191 mm) Extended Height: 22.6" - 48.7" (574 mm – 1,237 mm) Glide Adjustment ½" (14 mm) Desk 1" (25 mm) Bench Distributed Weight Capacity 220 lbs. (99.8 kg) Tip: When calculating lifting capacity, subtract the weight of the worksurface.
Page 9
This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 for FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 10
Para descargar este documento en español, visite www.steelcase.com/migrationse/userguide/es Pour télécharger ce document en français, visitez www.steelcase.com/migrationse/userguide/fr...