Switching The Display Between Centimetres And Inches; Setting The Memory Position - Steelcase Migration Bench User Manual

Operation and settings

Switching the display between centimetres and inches

You can select between displaying the height in centimetres [cm] or in inches [inches]. This function does not
change the desk height.
To change the display, proceed as indicated in the following table:

Setting the memory position

This function stores a defined desktop height. Each position memory button (1, 2, 3, 4) can store one desktop
height. As a result, up to four memory positions can be entered.
To store a desktop position, proceed as follows:
Migration Manual -en- 2018
 Press the position memory buttons 1, 2 and desktop Up at the same time.
 Press and hold this button combination for approx. 3 s.
 Release the buttons.

The display shows S and a number such as 7.
 Press and hold the button desktop Up until the display show S 5.

The display shows S 5.
 Press the memory button.

If the display was previously set to centimetres, it now switched to inch.

If the display was previously set to inch, it now switched to centimetres.
 Move the desktop to the height you want.

The display shows the desktop position, e.g. 73 cm.
 Press the memory button.

The display shows S.
Page 26 of 35