Clearing Unit Alarm Logs; Figure 42 Setting Controller Date And Time; Lc6000 Controller Display/Interface; Manual 2100-676B - Bard MULTI-TEC W24AAPA Installation Instructions Manual

3) Press UP or DOWN keys to scroll to Settings;
press ENTER key.
4) Press UP or DOWN keys to scroll to
Initialization; press ENTER key.
5) Press ENTER key to scroll to Clear Alarm
Logs? (see Figure 41).
6) Press UP or DOWN key to value to YES; press
ENTER key.
7) Press ESCAPE key several times to return to
Main Menu screen.
After each of the wall-mount units have been
addressed, had a run test performed and had the alarm
logs cleared, the rest of the system set up can proceed.
FIGURE 41

Clearing Unit Alarm Logs

Setting Up LC6000 for Operation
The LC6000 controller will be used for the remaining
steps in the set up process.
LC6000 Status Screen
The Status screen is the default start-up screen and
also the return screen after 5 minutes of no activity on
the LC6000. The screen can be accessed any time by
pressing the ESCAPE key repeatedly.
LC6000 Controller Display and Interface (Status Screen Shown)
ALARM KEY
MENU KEY
ESCAPE KEY
LC6000 interface key functions are the same as those shown for the TEC-
EYE in Figure 34 on page 80.
The Status screen on the LC6000 displays the current
date, time, unit displayed, zones and unit status (see
Figure 43).
4. Set LC Controller Date and Time
1) Press MENU key to access the Main Menu
screen.
2) Use UP or DOWN keys and ENTER key to
enter USER password 2000.
3) Press the UP or DOWN keys to scroll to the
Settings menu; press ENTER key.
4) Press UP or DOWN keys to scroll to Date/Time
menu; press ENTER key.
5) Press ENTER key to scroll to the desired value
to be changed (see Figure 42).
6) Press UP or DOWN keys to change the value.
7) Press ESCAPE key several times to return to
Main Menu screen.
NOTE: The LC6000 will sync the time and date
configured to each of the wall-mount units once
communication is established.
Setting Controller Date and Time
FIGURE 43
FIGURE 42
UP KEY
ENTER KEY
DOWN KEY

Manual 2100-676B

Page 83 of 88