Table 7 Lc6000 Status Messages - Bard MULTI-TEC W24AAPA Installation Instructions Manual

TABLE 6
MULTI-TEC Wall-Mount Unit Status Messages
Message
Stand Alone Orphan Mode Standby
th-TUNE Online
LC Online
Cont. Blower Continuous Blower Active
Off by th-TUNE
Freecooling
Optimized Cool Optimized Cooling Active
Cooling
Heating
Mechanical Dehumidification or
Active Dehum
Electric Reheat Active
Economizer Disable/Enhanced
Passive Dehum
Latent Removal (if available)
Self Test
Off by Alarm Unit Off by Alarm Condition
Off by BMS
Off by LC Unit Off by LC Master
Off by Keypad
Emergency Vent. Emergency Vent Mode Active
Emergency Cool Emergency Cool Mode Active
Emergency Off Emergency Off Mode Active
Description
th_TUNE Standby
LC Standby
Unit off by th-TUNE
Freecooling Active
Cooling Active
Heating Active
Self Test Running
Unit Off by BMS
Unit Off by Keypad
TABLE 7
LC6000 Status Messages
Message
On
The system has a major fault and is
Off by Alarm
The system has been disabled by
Off by BMS
The system has been turned off by
Off by Keypad
The system has detected a high
Emergency
temperature alarm and one or more
Cooling
zones are emergency cooling
The system has detected hydrogen
Emergency Vent and one or more zones are in
emergency ventilation
Description
The system is on
disabled
network supervisor
local user
Manual 2100-676B
Page 45 of 88