Manual 2100-676B - Bard MULTI-TEC W24AAPA Installation Instructions Manual

Figure 42 Setting Controller Date and Time ........ 83
Figure 43 LC6000 Controller Display/Interface ... 83
Figure 44 Enable/Disable Zone 1 Indoor
Humidity Sensor ............................... 84
Figure 45 Enable/Disable Zone 2 Indoor
Humidity Sensor ............................... 84
Figure 46 Enable/Disable Zone 3 Indoor
Humidity Sensor ............................... 84
Figure 47 Enable/Disable Zone 1 Indoor
Temperature Sensor .......................... 85
Figure 48 Enable/Disable Zone1 Remote
Temperature Sensor .......................... 85
Figure 49 Enable/Disable Zone 2 Remote
Temperature Sensor .......................... 85
Figure 50 Enable/Disable Zone 3 Remote
Temperature Sensor .......................... 86
Figure 51 Entering Total Number of Units .......... 86
Figure 52 Clearing LC6000 Alarm Logs ............. 86
Figure 53 Adjusting Sensor Offset Value ............ 87
Table 1 Clearance Required for Service Access
and Adequate Condenser Airflow ........ 54
Table 2 Minimum Clearance Required to
Combustible Materials ....................... 54
Table 3 Electrical Specifications .................... 62
Table 4 LC6000-100 Terminal Block Index .... 78
Table 5 LC6000/TEC-EYE Passwords (Default) 87
Table 6 WR Series Unit Status Messages ........ 88
Table 7 LC6000 Status Messages .................. 88
WARNING
!
Electrical shock hazard.
Have a properly trained individual perform
these tasks.
Failure to do so could result in electric shock
or death.
WARNING
!
Fire hazard.
Maintain minimum 1/4" clearance between the
supply flange and combustible materials.
Failure to do so could result in fire causing
damage, injury or death.
WARNING
!
Heavy item hazard.
Use more than one person to handle unit.
Failure to do so could result in unit damage or
serious injury.
CAUTION
!
Cut hazard.
Wear gloves to avoid contact with sharp
edges.
Failure to do so could result in personal injury.

Manual 2100-676B

Page 49 of 88