Table 6; Lc6000 Status Messages - Bard MULTI-TEC W24AAPA Installation Instructions Manual

TABLE 6

WR Series Wall-Mount Unit Status Messages
Message
PLC is on and has not started
Waiting...
running the application yet.
Unit is on and in orphan mode with
Stand-Alone
no calls for heating or cooling.
Unit is on and communicating with
LC Online the LC6000 with no heating or
Unit is operating with continuous
Cont. Blower blower when no heating or cooling
Unit has experienced a loss of main
Power Loss utility power. Alarm only available
Freecooling Unit is actively economizing.
Unit is mechanical cooling while
Optimized Cool
Cooling Unit is actively mechanical cooling.
Heating
Unit is taking measures to decrease
Passive Dehum
humidity without using extra energy.
Unit is taking active measures to
Active Dehum
Self Test Unit is performing a self test.
Unit has major fault preventing
Off by Alarm
Unit is disabled by the local unit
Off by DI
Unit has been turned off by the
Off by LC
Unit has been turned off by the
Off by Keyboard
There is an active override on the
Override Active
Unit is in Emergency Ventilation.
Emergency Vent LC6000 has an active hydrogen
Unit is in Emergency Cooling.
Emergency Cool Indoor temperatures have exceeded
Unit is in Emergency Off. LC6000
Emergency Off
has an active smoke alarm.
Manual 2100-676B
Page 88 of 88
Description
cooling calls.
calls are present.
with inverter units.
actively economizing.
Unit is actively heating.
decrease humidity.
operation.
disable/smoke input.
supervisory controller.
local user.
system.
alarm.
high temp alarms.
TABLE 7

LC6000 Status Messages

Message
On
The system has a major fault and is
Off by Alarm
The system has been disabled by
Off by BMS
The system has been turned off by
Off by Keypad
The system has detected a high
Emergency
temperature alarm and one or more
Cooling
zones are emergency cooling
The system has detected hydrogen
Emergency Vent and one or more zones are in
emergency ventilation
Description
The system is on
disabled
network supervisor
local user