Set Date And Time - Landis+Gyr ZMQ202 User Manual

4.4.2

Set Date and Time

H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual
Installation / De-installation
Check the phase
angles:
Phase angle U(L1)
Phase angle U(L2)
Phase angle U(L3)
Phase angle I (L1)
Phase angle I (L2)
Phase angle I (L3)
Back to operating
9.
display
All segments of the
1.
display are
illuminated
Enter service menu
R
2.
Enter set mode
3.
Select required
4.
setting
Select next digit to
R
be changed
5.
Change digit value
6.
Select digit to be
R
changed
7.
8. Repeat steps 5 - 7 for all digits to be changed
Confirm new
R
setting
9.
10. Repeat steps 3 - 8 for all settings to be changed
Advance display until End
11.
Back to operating
12.
display
Code 81.7.0
Code 81.7.1
Code 81.7.2
Code 81.7.4
Code 81.7.5
Code 81.7.6
Note: Current
must be flowing to
show the phase
angles
End of installation
diagnostic
Operating display
Display check
Set mode
Identification
number
Date, old value
Digit flashes
Digit flashes
Next digit flashes
All digits flash
simultaneously
Date, new value
End of set mode
Landis+Gyr
49/88