Landis+Gyr ZMQ202 User Manual page 45

Danger
Connect Communication and Serial Interfaces
Warning
H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual
Installation / De-installation
Avoid bare parts of wire
When voltage is applied, any bare part of the wire will become live. Ensure
no bare wire is visible above the terminal edge.
If this is not the case, the stripped part of the wire must be shortened as
necessary.
7. Plug in the ready-made telephone cables as shown on the terminal
connection diagram.
Power on
Incorrect connections could damage the meter or result in the meter
measuring incorrectly.
We recommend all connections be checked before applying power.
8. Open circuit the current transformer secondary circuit using the
provided assembly.
9. Switch on the voltage and current.
Landis+Gyr
45/88