Output Operation Procedure - Konica Minolta bizhub Press 1250P Additional Information

4
5
Select a print type.
% To print the data normally, press [Normal Print].
% To save as a temporarily suspended job (for proof print), press [Wait Mode]. You can check or
change the settings before printing. Perform proof printing to check the print result.
% To store as a suspended job, press [Hold Print]. You can check or change the settings before print-
ing. Perform proof printing to check the print result.
% To cancel printing, press [Cancel].
4.1.3

Output Operation Procedure

This section selectively describes the changed contents of the Mode Check screen displayed in the output
operation procedure.
When the machine is mounted with triple units of Paper Feeder Unit PF-703, the Mode Check screen does
not display the paper names provided as a part of tray information. To check all the information including the
paper names, press [Details] on the Mode Check screen to display the Tray Information dialog.
Tray Information dialog displayed when [Details] is pressed on the Mode Check screen
While the Tray Information dialog is displayed, you can press tray keys provided at the top of the screen to
select a desired tray. [Suspended], [Proof Print], and [Proof Print (1st Sheet)] at the bottom of the screen are
also functional.
4-4 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
STORE/RECALL Functions 4.1