Setting Paper Conditions: Change Set - Konica Minolta bizhub Press 1250P Additional Information

5
2
Press [OK].
The Tray Setting Screen will be restored.
5.4.4

Setting Paper Conditions: Change Set

%
When changing the paper conditions, it is recommended that you first recall the desired setting by op-
erating the "Recall" procedure, check the contents, and then modify the conditions as desired. For de-
tails of the "Recall" procedure, see "4.2.5 Setting Paper Conditions: Recall" of [User's Guide - Main
Body].
This section selectively describes the changed steps of the Change Set operation in setting paper conditions.
For details of unchanged steps, see "4.2.6 Setting Paper Conditions: Change Set" of [User's Guide - Main
Body].
1
No change
2
No change
3
Press [Weight].
The Weight Screen will be displayed.
% Specify the paper weight.
% 301-350 g/m
er Unit PF-703 or Tray 4 and Tray 7 of Paper Feeder Unit PF-706.
% The weight over 217 g/m
for Paper Type.
% When Embossed 2 is selected for Paper Type, the weight can be specified only between 75 to 216
g/m
4
No change
5
No change
6
No change
7
Press [Process Adj.].
The Process Adjustment Screen will be displayed.
5-18
2
/ 81-93 lb Bond paper is available only for Tray 4, Tray 7, and Tray 10 of Paper Feed-
2
/ 58 lb Bond cannot be specified for Book/News or Embossed selected
2
/ 21 to 57 lb Bond.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Printing Operations - Tray Setting 5.4