9
5
Press [Scan Settings].
6
Configure necessary items.
% For more information about the configurations on the Scan Setting screen, see "7.8 About the Scan
Setting Screen" of [User's Guide - Network Scanner].
% To specify the file name, press [File Name].
7
Set an original, and then press [Start].
The original is scanned, and the scanned data is stored in the specified destination.
% To return to the [SCAN] screen, press [Address].
% It is recommended to clear the settings and the selection after the operation. Settings on the Scan
Setting screen and the destination selection on the [SCAN] screen may remain till the machine is
restarted. To clear the settings on the Scan Setting screen, press Reset on the control panel with
that screen displayed. To clear the destination selection, return to the [SCAN] screen by pressing
[Address], and then press [Clear All], or press Reset on the control panel.
9-6
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Network Scanner Functions
9.2