Loading Paper In Paper Feeder Unit Pf-703 (Trays 3 To 11); Loading Small Size Paper In Paper Feeder Unit Pf-703 (Trays 3 To 11); Supplies And Disposals - Loading Cover Paper For Perfect Binding - Konica Minolta bizhub Press 1250P Additional Information

5.12

Supplies and Disposals - Loading Cover Paper for Perfect Binding

5.11.1

Loading Paper in Paper Feeder Unit PF-703 (Trays 3 to 11)

0
To use paper other than loaded in a tray, change the setting of that tray in [Tray Setting] from the Ma-
chine Screen.
0
If any feeding trouble occurs after loading paper by following the procedure below, perform the proce-
dure in "7.3.4 Adjusting the Space between the Side Guides of Paper Feeder Unit PF-703 (Trays 3 to
8)" of [User's Guide - Main Body] to load paper.
1
Withdraw the tray to be supplied with paper.
% The paper weight available for Tray 3, Tray 5, Tray 6, Tray 8,
Tray 9, or Tray 11 ranges from 40 g/m
Bond to 80 lb Bond. Tray 4, Tray 7, and Tray 10 can be load-
ed with 40 g/m
per.
For the subsequent procedure, see "7.3.3 Loading Paper in Paper Feeder Unit PF-703 (Trays 3 to 8)" of [Us-
er's Guide - Main Body].
5.11.2 Adjusting the Space between the Side Guides of Paper Feeder Unit PF-703
(Trays 3 to 11)
If front and rear side guides are not fixed upright, in other words, any difference in space is found between
top and bottom edges of the side guides, feeding trouble may be caused.
In this case, make an adjustment to properly fix the top and bottom edges of the side guides.
For the subsequent procedure, see "7.3.4 Adjusting the Space between the Side Guides of Paper Feeder Unit
PF-703 (Trays 3 to 8)" of [User's Guide - Main Body].
5.11.3

Loading Small Size Paper in Paper Feeder Unit PF-703 (Trays 3 to 11)

The minimum width of the side guides of Paper Feeder Unit PF-703 is 150 mm / 5.89".
Open the small size guides to load small size paper of 95 mm / 3.73" width at minimum.
%
When loading a paper size larger than the minimum width of the side guides, do not open the small size
guides.
%
Be sure to open small size guides as a pair when using the small size guides. Do not open only a half
of them to load paper.
For the subsequent procedure, see "7.3.6 Loading Small Size Paper in Paper Feeder Unit PF-703/PF-706
(Trays 3 to 8)" of [User's Guide - Main Body].
5.12 Supplies and Disposals - Loading Cover Paper for Perfect Binding
The cover paper to be used for perfect binding can be loaded in the following trays.
-
Cover tray of Perfect Binder PB-503
-
Main body trays (Tray 1 and Tray 2)
-
Paper Feeder Unit PF-703 (Tray 3 to Tray 11)
-
Paper Feeder Unit PF-706 (Tray 3 to Tray 8)
-
Large Capacity Post Inserter PI-PFU
-
Post inserter of Folding Unit FD-503
For the subsequent procedure, see "7.4.1 Loading Cover Paper in Cover Tray of Perfect Binder PB-503" of
[User's Guide - Main Body].
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
2
to 300 g/m
2 2
to 350 g/m / 11 lb Bond to 93 lb Bond pa-
2
/ 11 lb
5
5-27