Konica Minolta bizhub Press 1250P Additional Information page 59

2.10 Utility Menu Screen - [06 Administrator Setting] - [01 System Setting]
1
Follow the procedure on page 7-2 of [User's Guide - POD Administrator's Reference] to display the Ad-
ministrator Setting Menu Screen.
2
Press [01 System Setting] on the Administrator Setting Menu Screen, then press [01 Power Save Set-
ting] and [01 Power Save Setting] in sequence.
3
Select the Power Save mode to be set manually by pressing Power Save on the control panel, by
pressing [Auto Low Power] or [Auto Shut OFF] under "Power Save Function."
4
Select the period of time that must elapse before Auto Low Power is activated.
% Use the keys [+] and [,] provided on the right side of or under "Auto Low Power" to select the de-
sired period of time. [1 min.] is initially selected. Note that the option [1 min.] for Auto Low Power is
grayed out because the default setting for Auto Shut OFF is also [1 min.].
NOTICE
The period of time selected for Auto Low Power cannot exceed that selected for Auto Shut OFF.
The indication of the time in Auto Low Power area will be grayed out when the same period of time as
that of Auto Shut OFF is selected.
In this case, Auto Shut OFF will function instead of Auto Low Power.
5
Select the period of time that must elapse before Auto Shut OFF is activated.
% Use the keys [+] and [,] provided on the right side of or under "Auto Shut OFF" to select the desired
period of time. [1 min.] is initially selected.
% Select [---min.] to deactivate the Auto Shut OFF function.
NOTICE
The indication of the time in Auto Low Power area will be grayed out when the same period of time as
that of Auto Low Power is selected. In this case, Auto Shut OFF will function instead of Auto Low Power.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
2
2-21