Tray Setting - Tray Setting Outlines; Tray Setting - [Tray Setting] Operations; Setting Paper Size; Setting Paper Conditions: Change Set - Konica Minolta bizhub Press 1250P Additional Information

7
7 Additional Information for bizhub PRO 951 [User's
Guide - POD Administrator's Reference]
7.1

Tray Setting - Tray Setting Outlines

This section selectively describes the changed contents of tray setting outlines.
Paper setting item
Paper
Condi-
tions
7.2

Tray Setting - [Tray Setting] Operations

7.2.1

Setting Paper Size

7.2.2

Setting Paper Conditions: Change Set

%
When changing the paper conditions, it is recommended that you first recall the desired setting by op-
erating the "Recall" procedure, check the contents, and then modify the conditions as desired. For de-
tails of the "Recall" procedure, see "3.3.3 Setting Paper Conditions: Recall" of [User's Guide - POD
Administrator's Reference].
This section selectively describes the changed steps of the Change Set operation in setting paper conditions.
For details of unchanged steps, see "3.3.4 Setting Paper Conditions: Change Set" of [User's Guide - POD
Administrator's Reference].
1
No change
2
No change
3
No change
4
No change
5
No change
6
No change
7-2
Description
Process Specify the settings for Transfer
Adjust- Offset Adjustment, Process Speed
ment Setting, and Lead Edge Transfer for
High Humidity.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Tray Setting - Tray Setting Outlines
Setting options
Transfer Offset Adjustment:
Offset Lead Edge 1 (Front): -128 to +127
Offset Lead Edge 1 (Back): -128 to +127
Offset Lead Edge 2 (Front): -128 to +127
Offset Lead Edge 2 (Back): -128 to +127
Offset Lead Edge 3 (Front): -128 to +127
Offset Lead Edge 3 (Back): -128 to +127
Offset Center (Front): -128 to +127
Offset Center (Back): -128 to +127
Offset Rear Edge (Front): -128 to +127
Offset Rear Edge (Back): -128 to +127
Process Speed Setting:
Default, High Speed, Low Speed
Lead Edge Transfer for High Humidity:
Value Lead Edge Image, Auto Select for
Humidity, Value Separation
7.1