Manual Installation Using The Add Printer Wizard (Windows 8/Server 2012); For Network Connection (Lpr/Port 9100/Smb) - Konica Minolta bizhub Press 1250P Additional Information

3
3.2 Manual Installation Using the Add Printer Wizard
(Windows 8/Server 2012)
This chapter describes the procedure for installing the Windows printer driver using the standard Windows
Add Printer function, without using the installer.
For details about how to use the installer, refer to "User's Guide - Printer".
3.2.1

For Network Connection (LPR/Port 9100/SMB)

In Windows 8/Server 2012, you can install the printer driver either by searching for the printer on the network,
or by creating a new printer port.
Settings of this machine
To use Port 9100, LPR, or SMB printing, you must configure the network settings for the machine in advance.
Items to be configured
IP Address
RAW port number
LPD Setting
SMB Setting
d
Reference
For details on the network settings for this machine, refer to "User's Guide - POD Administrator's Reference".
To use SMB printing in the IPv6 environment, [Direct Hosting Setting] for the machine should be enabled. For
details, refer to "User's Guide - POD Administrator's Reference".
Designate the file for the printer driver provided in "EN (en)" folder of each printer driver contained in the Driver
CD-ROM.
Installing the printer driver by searching for the printer using the Add Printer
Wizard.
0
Installing the driver to Windows 8/Server 2012 based computers requires the administrator authority.
0
Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the Driver CD-ROM into the CD-ROM drive.
2
Right-click the Start window, and then click [Devices and Printers] under [All Applications] - [Control
Panel] - [Hardware and Sound].
3
On the toolbar, select [Add a printer].
3-4

Manual Installation Using the Add Printer Wizard (Windows 8/Server 2012)

Description
In [TCP/IP Settings] of this machine, specify the IP address.
To use Port 9100 printing:
In [TCP/IP Setting] for the machine, enable the RAW port number
(default value: [9100]).
To use LPR printing:
In [LPD Setting] for the machine, enable LPD printing.
To use SMB printing:
In [SMB Setting] - [Print Settings], specify NetBIOS Name, Print
Service Name, and Workgroup.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
3.2