Turning On/Off The Heater Of The Perfect Binder; Job Management - Overview Of The Job List Screen - Konica Minolta bizhub Press 1250P Additional Information

1
1.10.1

Turning On/Off the Heater of the Perfect Binder

To turn off the heater of the perfect binder
When the job using perfect binder is completed, the heater of the perfect binder will automatically be turned
off in one minute.
The heater will also be turned off automatically in one minute if any operation has not been made on the Per-
fect Binder PB-503 after completion of the warmup.
The heater can be turned off manually by pressing the heater switch for the perfect binder [OFF] on the Ma-
chine Screen while warming up or ready for operation.
Pressing the heater switch for the perfect binder [OFF] will not function if any perfect binding jobs are entered.
d
Reference
Service can set the heater not to be turned off automatically after one-minute interval. In this case, the heater
will not be turned off till the Auto Low Power/Auto Shut Off functions on the main body.
The machine can be set not to turn off the heater or to select the time interval to shut off the heater in the
Administrator Setting of the Utility menu. For details of the setting, contact your service representative. For
the setting procedure, see page 2-20 of this guide. In either case, check the time to elapse before the heater
is turned off and be careful not to allow the glue pellets to deteriorate.
1.11

Job Management - Overview of the Job List Screen

This section selectively describes the changed contents of the Job List Screen.
When the machine is mounted with triple units of Paper Feeder Unit PF-703, the following screens devel-
oped from the Job List Screen do not display the paper names provided as a part of tray information. To
check all the information including the paper names, press [Details] on each screen to display the Tray Infor-
mation dialog.
-
Mode Check Screen developed from the Job Active/Suspend List Screen
-
Mode Check Screen developed from the Output History Screen
-
Mode Check Screen developed from the Incomplete History Screen
Example:
Mode Check Screen for the machine with double units of Paper Feeder Unit PF-703 mounted
1-22 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Job Management - Overview of the Job List Screen 1.11