Konica Minolta bizhub Press 1250P Additional Information page 41

2.1 Tray Setting - Tray Setting Outlines
Paper setting item
Paper
Condi-
tions
Air Assist
*1
: For the post inserter of Folding Unit FD-503 and Post Inserter PI-502, the only available paper setting is
Detect Size Setting in Paper Size. When Perfect Binder PB-503 is attached, the paper size and paper set-
tings for perfect bind covers can be specified for the post inserter of Folding Unit FD-503.
*2
: The postcard adapter (option) is required for loading postcards into the main body trays (Tray 1, Tray 2).
Contact your service representative, if desired.
*3
: Use the small size guides when loading postcards into Paper Feeder Unit PF-703/PF-706. For details,
see "5.3.6 Loading Small Size Paper in Paper Feeder Unit PF-703/PF-706 (Trays 3 to 8)" of [User's Guide -
Copier]. Paper feedability for postcards may become lower depending on the paper type selected. For this
reason, it is recommended to load postcards into the middle trays of Paper Feeder Unit PF-703 (Tray 4, Tray
7, and Tray 10) or those of Paper Feeder Unit PF-706 (Tray 4 and Tray 7). For details, contact your service
representative.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Description
Weight Select one of 10 types provided on
the screen.
2
301-350 g/m
per is available only for Tray 4, Tray
7, and Tray 10 of Paper Feeder
Unit PF-703 and Tray 4 and Tray 7
of Paper Feeder Unit PF-706.
The weight over 217 g/m
Bond cannot be specified for
Book/News or Embossed selected
as paper type. Also, for Embossed
2, the weight can be specified only
between 75 to 216 g/m
lb Bond.
Process Specify the settings for Transfer
Adjust- Offset Adjustment, Pressure Power
ment Setting, Process Speed Setting,
Embossed 2 Density Level Setting,
and Lead Edge Transfer for High
Humidity.
Set to prevent multi-feed or paper
jam by blowing air on sheets being
fed.
This function is not provided to the
post inserter of Folding Unit FD-
503 and Post Inserter PI-502.
Setting options
40-49 g/m
50-61 g/m
/ 81-93 lb Bond pa- 62-74 g/m
75-91 g/m
92-135 g/m
136-162 g/m
163-216 g/m
2
/ 58 lb 217-244 g/m
245-300 g/m
301-350 g/m
2
/ 21 to 57
Transfer Offset Adjustment:
Offset Lead Edge 1 (Front): -128 to +127
Offset Lead Edge 1 (Back): -128 to +127
Offset Lead Edge 2 (Front): -128 to +127
Offset Lead Edge 2 (Back): -128 to +127
Offset Lead Edge 3 (Front): -128 to +127
Offset Lead Edge 3 (Back): -128 to +127
Offset Center (Front): -128 to +127
Offset Center (Back): -128 to +127
Offset Rear Edge (Front): -128 to +127
Offset Rear Edge (Back): -128 to +127
Pressure Power Setting:
Default, Very Weak, Weak, Medium,
Strong
Process Speed Setting:
Default, High Speed, Mid Speed, Low
Speed
Embossed 2 Density Level Setting:
Level 1, Level 2, Level 3
Lead Edge Transfer for High Humidity:
Value Lead Edge Image, Auto Select for
Humidity, Value Separation
Tray 1, Tray 2, Tray 3 to Tray 8 (PF-706):
Auto, ON, OFF
Tray 3 to Tray 11 (PF-703), PI-PFU 1 to
PI-PFU 3: Auto, Manual (1 to 9 for Lead,
1 to 9 or OFF for Side)
PB Tray: ON, OFF
2
/ 11-13 lb Bond
2
/ 14-16 lb Bond
2
/ 17-20 lb Bond
2
/ 21-24 lb Bond
2
/ 25-36 lb Bond
2
/ 37-43 lb Bond
2
/ 44-57 lb Bond
2
/ 58-65 lb Bond
2
/ 66-80 lb Bond
2
/ 81-93 lb Bond
2
2-3