Konica Minolta bizhub Press 1250P Additional Information page 129

5.15 Adjustment - Function Overview
% When [Rear Diagonal] is selected:
Allowance: a = 15.2 +/- 3 mm
% When [Rear Parallel] is selected:
Allowance: a = 19.6 +/- 2 mm
% When [Front Parallel] is selected:
Allowance: a = 6.4 +/- 3 mm
8
If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data.
% Adjustable range of [2 Position Pitch (120 mm)], [2 Position Pitch (140 mm)], [2 Position Pitch (165
mm)]: -5 (narrow) to +5 (wide) (1 step = 1.0 mm)
% Adjustable range of [Rear Diagonal]: -5 (to front) to +5 (to back) (1 step = 1.0 mm)
% Adjustable range of [Rear Parallel], [Front Parallel]: -3 (to front) to +3 (to back) (1 step = 1.0 mm)
% Use [+<->-] to specify the value to be positive or negative.
9
Press [Set] to change the setting with the current value.
10
Repeat the steps from 3 to 9 until the desired result is obtained.
11
Press [Return] to restore the Stapler (Main) Adjustment Menu Screen.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
5
5-35