7.4
Adjustment - Function Overview
7
Check the staple positions (a) of the output sheets.
% When [2 Position Pitch (120 mm)], [2 Position Pitch (140 mm)], or [2 Position Pitch (165 mm)] is se-
lected:
Allowance for [2 Position Pitch (120 mm)]: a = 120 +/- 3 mm
Allowance for [2 Position Pitch (140 mm)]: a = 140 +/- 3 mm
Allowance for [2 Position Pitch (165 mm)]: a = 165 +/- 3 mm
% When [Rear Diagonal] is selected:
Allowance: a = 15.2 +/- 3 mm
% When [Rear Parallel] is selected:
Allowance: a = 19.6 +/- 2 mm
% When [Front Parallel] is selected:
Allowance: a = 6.4 +/- 3 mm
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
7
7-7