Tray Setting - [Tray Setting] Operations; Setting Paper Size; Setting Paper Conditions: Change Set - Konica Minolta bizhub Press 1250P Additional Information

2
2.2

Tray Setting - [Tray Setting] Operations

This section describes the basic operating procedure of Tray Setting which can be performed by pressing
[Tray Setting] on the Machine Screen.
For details of Tray Setting provided to the following trays, see appropriate sections of [User's Guide - POD
Administrator's Reference].
3.3.1 to 3.3.8: main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Tray 3 to Tray 11), Paper Feeder
Unit PF-706 (Tray 3 to Tray 8)
3.3.9: PI-PFU tray
3.3.10: Perfect Binder PB-503 cover tray
3.3.11: post inserter of Folding Unit FD-503
3.3.12: Post Inserter PI-502 mounted on Finisher FS-532
2.2.1

Setting Paper Size

This section selectively describes the changed contents in setting paper size.
Selecting [Postcard]
NOTICE
Postcards are available in some areas only.
1
Select [Postcard] on the Size Setting Screen.
The Postcard Screen will be displayed.
% If you select [Tray 1] or [Tray 2] for Paper Tray, the postcard adapter (option) is required to be in-
stalled in the selected tray. Contact your service representative, if desired.
% If you select a tray from [Tray 3] to [Tray 11] for Paper Tray, use the small size guides of the selected
tray. For details, see "5.3.6 Loading Small Size Paper in Paper Feeder Unit PF-703/PF-706 (Trays 3
to 8)" of [User's Guide - Copier].
2
Press [OK].
The Tray Setting Screen will be restored.
2.2.2

Setting Paper Conditions: Change Set

%
When changing the paper conditions, it is recommended that you first recall the desired setting by op-
erating the "Recall" procedure, check the contents, and then modify the conditions as desired. For de-
tails of the "Recall" procedure, see "3.3.3 Setting Paper Conditions: Recall" of [User's Guide - POD
Administrator's Reference].
This section selectively describes the changed steps of the Change Set operation in setting paper conditions.
For details of unchanged steps, see "3.3.4 Setting Paper Conditions: Change Set" of [User's Guide - POD
Administrator's Reference].
2-4 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Tray Setting - [Tray Setting] Operations 2.2