Konica Minolta bizhub Press 1250P Additional Information page 161

8.2 Manual Installation Using the Add Printer Wizard (Windows 8/ Server 2012)
3
On the toolbar, select [Add a printer].
4
Select this machine from the list, and then click [Next].
% To use the LPR/Port9100 protocol, select the printer with its IP address.
% To use the SMB connection, select the printer with its "\\NetBIOS name\print service name". You
can check the NetBIOS name and print service name by selecting [Administrator Setting] - [Network
Setting] - [Controller NIC Setting Menu] - [SMB Setting] - [Print Setting]. In the default setting, the
last six characters of the NetBIOS name correspond to the low-order three bytes of the MAC ad-
dress.
To check the MAC address, select [Configuration Page].
% For the SMB connection, click [Next], and then click [OK] in the [Connect to Printer] page that ap-
pears.
% It may take some time to finish searching the entire list of printers.
5
Click [Have Disk...].
6
Click [Browse...].
7
Select a desired printer driver in the CD-ROM, and then click [Open].
% Available printer drivers: PS Plug-in driver, PPD driver, PCL driver
8
Click [OK].
The [Printers] list appears.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
8
8-5