Utility Menu Screen - [04 Administrator Setting] - [05 Copy/Printer Setting] - Konica Minolta bizhub Press 1250P Additional Information

5.19

Utility Menu Screen - [04 Administrator Setting] - [05 Copy/Printer Setting]

1
Follow the procedure on page 12-2 of [User's Guide - Main Body] to display the Administrator Setting
Menu Screen.
2
Press [01 System Setting] on the Administrator Setting Menu Screen, then press [07 Size Setting].
3
Select either [12.0 mm] or [15.0 mm].
4
Press [OK] to complete the setting.
% To cancel the change, press [Cancel]. In either case, the System Setting Menu Screen will be re-
stored.
5.19 Utility Menu Screen - [04 Administrator Setting] - [05 Copy/Printer
Setting]
This section provides the added setting options.
Setting item
01 Offset
Setting
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
Description
02 Offset Select the offset output mode.
Output Change Out Position:
Mode Set- Offsets the output sheets for each job.
ting Partition Paper Insertion:
Inserts a sheet of paper after each job.
Select a tray for feeding partition pa-
pers at this point.
Position Sw. + Paper Insert:
Offsets the output sheets for each job
and inserts a sheet of paper after each
job. Select a tray for feeding partition
papers at this point.
Stop Print:
Temporarily stops printing for each job.
Options (with default bold-
faced)
Offset Output Mode:
Change Out Position, Parti-
tion Paper Insertion, Position
Sw. + Paper Insert, Stop Print
Insertion Tray:
Tray 1, Tray 2, Tray 3, Tray 4,
Tray 5, Tray 6, Tray 7, Tray 8,
Tray 9, Tray 10, Tray 11, PI 1,
PI 2, PI-PFU 1, PI-PFU 2, PI-
PFU 3
5
5-43