Specifying Paper Settings For The Bypass Tray; To Specify The Paper Size (Change Setting) - Konica Minolta bizhub 200 User Manual

Copy operations

Hide thumbs Also See for bizhub 200:

Table of Contents

Specifying paper settings for the bypass tray

This section describes the procedures for specifying the size and type of pa-

per loaded in the bypass tray.

For details on loading the paper into the bypass tray, refer to "Loading

paper into the bypass tray" on page 2-60.

Standard paper sizes can be specified for the paper loaded into the bypass

This is useful, for example, when the size of the paper that is loaded cannot

be automatically detected (such as with paper in inch sizes).

Load the paper into the bypass tray.

In the Basics screen,

touch [Paper].

The Paper screen ap-

Select the button for the

bypass tray.

Touch [Change Setting].

Copy paper/original documents

Bizhub 250 Bizhub 350