Dexcom G6 User Manual page 105

STEP
Receiver: Calibration
4 9
of
STEP
Receiver: Calibration
5 9
of
STEP
Receiver: Calibration
6 9
of
Dexcom G6 ® System User Guide
Chapter 7: Calibrate
Tap up/down arrows to enter meter value. This example uses
128 mg/dL.
Tap Save.
Sensor default value for calibration is dashes (– – –) (or the most
recent G6 reading).
Verify BG value is correct.
If correct, tap Yes. If you don't tap Yes, the BG level isn't saved.
If incorrect, tap No and re-enter.
Wait while BG value is accepted.
103