Page 1
START HERE Set up Your smart phone Receiver Sensor Transmitter...
Page 2
• Sensor applicator inserts sensor under (inside) your skin Transmitter • Sends glucose information from sensor to display device All graphics are representational. Your product may look different. Review the Safety Statement in Using Your G6, Appendix E before using your G6.
• Watch the tutorial found in your product information bundle or online at: dexcom.com/links/g6/tutorial • Contact Dexcom Care for individualized support or to register for free, online webinars at: dexcom.com/dexcom-care or 1.888.738.3646 • For Technical Support, email TechSupport@dexcom.com, or call 1.888.738.3646...
Page 6
Step 1: Set Up App Download and open the Dexcom app Follow onscreen setup instructions When prompted, enter your: • Sensor code from the sensor applicator No sensor code? See Using Your G6, Appendix A Troubleshooting...
Page 7
That means your sensor is getting used to your body. During warmup: • No G6 readings, alarm/alerts • Keep smart device within 20 feet of transmitter Wait 2 hours • When complete, tap OK to see the home screen • Now you get G6 readings, alarm/alerts...
Step 2: See Using Your G6 Learn how to: • Read your home screen Using Your G6 • Use alarm and alerts • Welcome • Home Screen Overview • Alarm and Alerts • Make treatment decisions • Treatment Decisions • Ending Your Sensor Session •...
Page 9
Receiver Sensor Transmitter Set Up Receiver...
Page 10
Take receiver out of box Turn on receiver Press and hold power button for 2-3 seconds Follow onscreen instructions When prompted, enter your: • Sensor code from the sensor applicator you will insert No sensor code? See Using Your G6, Appendix A Troubleshooting...
Page 11
Serial Number (SN) from: Transmitter box Back of transmitter You’re done with this step when you see this screen:...
Page 12
Step 2: Use Applicator to Insert Built-in Sensor Take applicator with built-in sensor out of sensor box Choose sensor site 18 years and older 2-17 years Use applicator to insert built-in sensor Wash and dry hands; clean Use applicator with sensor sensor site with alcohol wipe code entered during display device setup...
Page 13
Remove both labels; don’t Move applicator to sensor site touch adhesive Place adhesive on skin Fold and break off safety guard Press button to insert Discard applicator...
Step 3: Attach Transmitter Take transmitter out of box Snap in transmitter Clean transmitter with alcohol Insert transmitter tab into slot Slot Snap transmitter firmly into Rub around patch 3 times place...
Page 15
Tap Start Sensor to begin 2-hour warmup During warmup: • No G6 readings, alarm/alerts • Keep receiver within 20 feet of transmitter Wait 2 hours • When complete, tap Next to go to home screen • Now you get G6 readings, alarm/alerts...
Page 16
Step 5: See Using Your G6 Learn how to: • Read your home screen • Use alarm and alerts Using Your G6 • Welcome • Home Screen Overview • Make treatment decisions • Alarm and Alerts • Treatment Decisions • Ending Your Sensor Session •...
Need help?
Do you have a question about the G6 and is the answer not in the manual?
Questions and answers