Assembly; Safe Assembly; Assembling The Mast To The Base - Invacare ILIFTEE User Manual

4 Assembly

4.1 Safe Assembly

WARNING!
Risk of Injury
Improper assembly may cause injury or damage.
– Use only Invacare parts in the assembly of this patient
lift. The base legs, the mast, boom, pump assembly
and the hanger bar are manufactured to specifications
that assure correct alignment of all parts for safe
functional operation.
– DO NOT overtighten the mounting hardware. This
will damage the mounting bracket.
1171892-A

4.2 Assembling the Mast to the Base

1. Lock rear casters A (Detail A).
Remove the shoulder bolt B, nut C and washers D, from the
2.
mast E.
3. Raise the mast assembly to an upright position until it locks in
place (Detail B).
4. Install the shoulder bolt and washers, through the mast and the
base F.
5. Secure with the nut.
WARNING!
– The mast may be folded for storage or transporting.
Each time the mast is folded, the mast MUST be
properly secured to the base assembly.
Assembly
13