LifeGear 30805 Owner's Manual page 12

Step 5
1. To set down the Aluminum Beam (24), firmly hold the Aluminum Beam (24) with one
hand and the other hand to pull the Lock Pin Ball (34) with Lock Pin (34B).
2. Carefully lower the Aluminum Beam (24) until the Rear Stabilizer End Caps (31) to the
ground.
3. The Aluminum Beam (24) is in the flat position.
4. With one hand to hold the Pedal Strap (21) and then pull it up until the Lock Pin (34B)
"pops" down into the locked position.
5. Make sure the Lock Pin (34B) is in the LOCK POSITION before using the rower.
1
3
4
(21)
11
2
(31)
5
LOCK POSITION