Ruggedcom; Troubleshooting - RuggedCom RuggedSwitch RS1600 User Manual

RuggedSwitch™ User Guide

Troubleshooting

Problem One
• I don't need VLANs at all. How do I turn them off?
Simply leave all ports set to type "Edge" and leave the native VLAN set to 1. This
is the default configuration for the switch.
Problem Two
• I have added two VLANs 2 and 3. I made a number of ports
If the devices need to communicate at the physical address layer, they must be
members of the same VLAN. If they can communicate in a layer 3 fashion (i.e.
using a protocol such as IP or IPX) you can use a router. The router will treat
each VLAN as a separate interface, which will have its own associated IP address
space.
members of these VLANS. Now I need some of the devices in one
VLAN send messages to some devices in the other VLAN.

RuggedCom