Port Parameter Ranges & Default Settings; Figure 12: Port Configuration And Status Menu - RuggedCom RuggedSwitch RS1600 User Manual

RuggedSwitch™ User Guide
The main menu Port Configuration and Status command presents this menu.
Commands are provided to reset, configure and obtain the status of ports.
My Switch
<CTRL> Z-Help S-Shell

Figure 12: Port Configuration And Status Menu

Port Parameter Ranges & Default Settings
The following set of tables lists default per-port configuration parameters
Configuration Item
Status
Media Type (10/100BaseT)
Media Type (10BaseFL)
Media Type (100BaseFX)
Flow Control
FEFI
Broadcast Rate
Port Security
Link Alarms
Port Configuration and Status
Configure Port Parameters
Configure Port Rate Limiting
Configure Port Security
Configure Port Mirroring
View Port Status
Reset Port(s)
Default Value Supported Values
Enabled Disabled, Enabled
Auto Select Auto Select, 10TX Half, 10TX Full, 100TX
Half, 100TX Full
10BaseFL Full 10BaseFL Half, 10BaseFL Full
100BaseFX Full 100FX Half, 100FX Full
Enabled Disabled, Enabled
Disabled Disabled, Enabled
2000 /sec 100 to 2000 /sec, Disabled
Disabled Disabled, Enabled, Learn Single
Enabled Disabled, Enabled
Admin Access
RuggedCom