Configuring The Upnp Av Media Server - Technicolor MediaAccess TG788VN Setup And User Manual

8.2.1 Configuring the UPnP AV Media Server

Introduction
The Network File Server is enabled by default and ready to use.
Enabling/disabling the UPnP AV Media Server
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Tools menu, click Content Sharing.
3 In the Navigation
4 Under UPnP AV Media Server, click Server Enabled.
5 Click Apply.
Media Database
When you plug in your USB storage device, the MediaAccess Gateway will automatically start building the media database.
This database contains all meta data of the media files stored on your USB storage device.
To view the status of the media database:
1 Browse to the MediaAccess Gateway GUI.
For more information, see
2 On the Tools menu, click Content Sharing.
3 In the Navigation
4 Under UPnP AV Media Server, you can find the Database Status.
5 If you want to rebuild the database, click Rebuild.
DMS-CTC-20120510-0000 v1.0
"Accessing the MediaAccess Gateway GUI" on page
bar, click Configure.
"Accessing the MediaAccess Gateway GUI" on page
bar, click Configure.
8 SHARING CONTENT
33.
33.
69