Configuring Wpa-Psk Encryption - Technicolor TG672 Setup And User Manual

5 THE TECHNICOLOR GATEWAY WIRELESS ACCESS POINT

5.3.2 Configuring WPA-PSK Encryption

Procedure
Proceed as follows:
1 Open the Technicolor Gateway
2 Under Office Network, click Wireless.
3 The Wireless Access Point page appears. In the upper-right corner, click Configure.
4 Under Encryption, select Use WPA-PSK Encryption.
5 In the WPA-PSK Encryption Key box, type a the key of your choice. The key must be in one of the following formats:
 8 to 63 alphanumeric characters. For example: MyKey123
 8 to 64 hexadecimal characters (characters from 0 to 9 and from A to F). For example: C54F48A5.
6 In the WPA-PSK Version list, click the WPA-version of your choice. For more information, see
page 63.
7 Click Apply.
8 Reconnect your wireless client(s) to the Technicolor Gateway using these new security settings.
For more information, see
Client without WPS" on page
66
GUI.
"5.1 Connecting Your Wireless Client via WPS" on page 60
62.
"Encryption types" on
or "5.2 Connecting Your Wireless
E-DOC-CTC-20100728-0008 v2.0