Configure The Technicolor Gateway - Technicolor TG587n v3 Setup And User Manual

3 MANUAL INSTALLATION

3.4 Configure the Technicolor Gateway

Introduction
If your service provider did not preconfigure your Technicolor Gateway, you may have to configure the Technicolor
Gateway via its Graphical User Interface (GUI).
Requirements
JavaScript must be enabled on your web browser (this is the default setting). For more information, consult the help of your
web browser.
Procedure
Proceed as follows:
1 Open your web browser.
2 The Technicolor Gateway informs you that you have not yet configured your Technicolor Gateway.
If this window does not appear, browse to http://dsldevice.lan or to the IP address of your Technicolor Gateway (by
default: 192.168.1.254) and click Technicolor Gateway on the menu on the left-hand side.
3 Click Setup my Technicolor Gateway.
4 The Easy Setup wizard appears. This wizard will guide you through the configuration of your Technicolor Gateway. Click
Next and follow the instructions.
26
DMS-CTC-20101206-0017 v1.0